Benchmarking: Bond - Fort Knox

Benchmarking: Bond/Barratt - Fort Knox

• Magnuson, R.; Hallow, J.; Mosher, J.; Major, K., The Fort Knox Mill: Design, Commissioning and Operation. Proceedings of the SAG 2001 Conference, Vancouver, Canada.

Checking the July 1999 survey against the Bond/Barratt model for SAB circuit.

Circuit Description and Inputs

The paper is believed to report power and specific power consumption values relative to the plant DCS. It is assumed that the DCS measurement happens at the motor input leads; the conversion of DCS to shell power for synchronous motors with pinions is 0.960 × 0.985 = 0.9456.

• Work index for ball milling=13.67 kWh/t (12.4 kWh/st);
• Work index for rod milling=12.02 kWh/t (10.9 kWh/st);
• assume Work index for crushing=10 kWh/t (similar to pilot plant samples).
• Feed F₈₀ size= 106 mm
• Product P₈₀ size= 178 µm
• Measured E_total= 10.5 kWh/t relative to shell (10.1 kWh/st relative to DCS)

Mill power draw is given in both Tables 4 and 6. It appears that the units in Table 4 are incorrect, and the SAG and ball mill power draw values appear to be kW, and not horsepower as stated. The power draw values from Table 6 are:

• Measured SAG mill power draw= 8,910 kW (11,950 hp).
  • Assumed to be DCS indication.
  • Modelled conditions to match power draw: balls=16% v/v; filling=31% v/v; speed=75% c/s; 6" liner.
• Measured Ball mill power draw= 10,330 kW (13,850 hp, sum of two mills).
  • Assumed to be DCS indication.
  • Modelled conditions to match power draw: filling=29% v/v; speed=74% c/s; 6" liner.
• Measured throughput= 1733 t/h (1910 st/h)

Circuit operating work index is given in the paper as 13.4 kWh/st, which would convert to 14.0 kWh/t at mill shell. Checking the math:

$E_{total} = 10.5 \hbox{ kWh/t} = Wi_O \times \left( \tfrac{10}{\sqrt{178} }- \tfrac{10}{ \sqrt{106000} } \right)$

Reorganize to solve for Wi_O:

$Wi_O = \frac{10.5}{ \left( {10\over \sqrt{178} }- {10\over \sqrt{106000} } \right) } = 14.61 \hbox{ kWh/t}$

• Circuit operating work index to use for benchmarking is 14.6 kWh/t

Default Model Results

Model screenshot

• Using 15% E_ssbm contingency (default for SAB circuit).
• Bond/Barratt model E_total= 11.95 kWh/t (model 13% high)
• Bond/Barrat model Wi_O= 16.6 kWh/t (model 13% high)
• Bond/Barratt model throughput= 1522 t/h (model 13% low)

Result for default model conditions:

	Etotal	WiO		Tonnage
Model	11.95	16.60	kWh/t	1,522	t/h
Measured	10.50	14.61	kWh/t	1,733	t/h
Difference	1.45	1.99	kWh/t	211	t/h
Difference	12.9%	12.8%		12.9%

Model Tuning

The Bond/Barratt model is tuned using a calibration factor on the Single Stage Ball Mill specific energy consumption estimate (E_ssbm).

• Calculated E_ssbm = 10.39 kWh/t
• Measured E_total = 10.50 kWh/t
• Model calibration factor = 1%