Benchmarking: Bond - Meadowbank

Benchmarking: Bond/Barratt Circuit Specific Energy Consumption - Meadowbank

• Muteb, P. & Allaire, J., Meadowbank Mine Process Plant Throughput Increase, Proceedings of the Canadian Mineral Processors Annual General Meeting, Ottawa, Canada, January 2013.

Paper describes a "sick" SAG mill and the changes made to "bring it to health".

Design criteria

A survey was conducted on the "sick" mill in May, 2012 reported the following the following:

• A×b 38.6
• Ball mill work index 10.9 kWh/t
• Ore density 2.93 kg/L (contains magnetite)
• SAG mill feed F₈₀ 38 mm (pre-crushing)
• Cyclone overflow P₈₀ 79 µm
• Throughput 446 tonnes/hour

To run the Bond/Barratt model requires work index values for rod milling and crushing. The reported A×b (38.6) is similar to the "Design Criteria" sample at Phoenix (A×b of 37.5) published by J.Seidel et al, SAG 2006. Seidel also reported the following work index values that will be used as proxies for the Meadowbank ore:

• Wi_RM 17.2 kWh/t
• Wi_C 17.6 kWh/t

The "sick" mill corresponds to the May 2012 survey and the "healthy" mill corresponds to the September 2012 conditions in Figures 7 and 8.

The SAG mill uses a standard Austin model and the ball mill uses a Nordberg wet overflow model without density correction.

Model parameter fitting, sick & healthy circuits

The following tables back-calculate the "Essbm contingency" model fitting parameter for the Bond/Barratt SABC model (which includes allowance for phantom cyclone effects). Specific energy references the "mill shell" kW values.

"Sick" SAG	SAG	BM	Etotal
DCS kW	3,374	4,341
Shell kW	3,190	4,105
Throughput, t/h	446	446
Specific Energy, kWh/t	7.15	9.20	16.36
Essbm			13.23
contingency			24%

Note that no survey was done in this period, so the E_ssbm is assumed to be the same as the May 2012 value (the ore is the same hardness).

"Healthy" SAG	SAG	BM	Etotal
DCS kW	3,350	4,341
Shell kW	3,168	4,105
Throughput, t/h	500	500	Etotal
Specific Energy, kWh/t	6.34	8.21	14.55
Essbm			13.23
contingency			10%

The default contingency for a Bond/Barratt SABC model is 10%. The "healthy" mill work out to exactly 10% - the model E_total value fits perfectly.

Healthy circuit simulation

Screenshot of the "healthy" Meadowbank circuit simulation

Combining the Bond/Barratt specific energy model, the Austin SAG model described in the bibliography and the Nordberg ball mill model described in the bibliography results in the following throughput predictions for a "healthy" milling circuit using the work index values above:

• Actual SAG/ball motor powers (at shell): 3,168 kW / 4,105 kW
• Actual daily average throughput: 500 tonnes/hour
• Predicted SAG/ball motor powers (at shell): 3,112 kW / 4,186 kW
• Predicted nominal throughput: 501 tonnes/hour (no difference)

	SAG	BM	total
Measured specific energy consumption, kWh/t	6.34	8.21	14.55
Predicted specific energy consumption, kWh/t	6.21	8.35	14.55
Difference, kWh/t	-0.13	0.14	0.00
Difference, %	-2.1%	1.7%	0.0%

The total specific energy consumption is exactly the same in the simulation as is observed in the plant, and the estimates for E_SAG and E_ball are very close to the plant observation. The model throughput prediction exactly matches the plant measurement.

Sick circuit simulation

Screenshot of the "sick" Meadowbank circuit simulation

Modelling the "sick" SAG mill is more difficult. The transfer size is forced to match the survey value by setting the upper limit to the surveyed value 1240 µm (and neglecting a phantom cyclone effect as it can not be calculated without a full size distribution). This forces the circuit into a SAG-limited situation which will restrict the throughput. The ball mill is modelled with a fixed speed (overgrinding versus the target P₈₀), but is not important to the overall throughput. In reality, the ball mill is probably operating inefficiently under these conditions and the product will be coarser than predicted.

• Actual SAG/ball motor powers (at shell): 3,374 kW / 4,341 kW
• Actual daily average throughput: 446 tonnes/hour
• Predicted SAG/ball motor powers (at shell): 3,112 kW / 4,186 kW
• Predicted nominal throughput: 428 tonnes/hour (-4.1% difference)

	SAG	BM	total
Measured specific energy consumption, kWh/t	7.15	9.20	16.36
Predicted specific energy consumption, kWh/t	7.27	9.78	17.06
Difference, kWh/t	+0.12	+0.58	+0.70
Difference, %	+1.7%	+6.3%	+4.3%