Template:Testwork-listing

Laboratory tests of grindability, impact, abrasion and compression.

• wibm: Bond ball mill work index (sometimes called "BWI")
• wirm: Bond rod mill work index (sometimes called "RWI")
• wic: Bond crushing work index (low energy impact, sometimes called "LEIT", "IWI" or "CWI")
• dwt: Drop Weight tests, SMC Test ® of SMCC Pty Ltd. and JK DWT (values stored include A×b and DWI)
• spi: SAG Power Index (SPI ® of SGS Mineral Services; originally called a "Starkey SAG test"^{Starkey et al, 1994})
• ai: Bond abrasion index
• ucs: Unconfined Compressive Strength, a detailed geotechnical test conducted on drill core
• pli: Point Load Index, a field-test conducted on drill core

Geological tables, used for organizing and partitioning samples, or as proxies for test results.

• litho: Lithological, alteration and sample acquisition data, including drill hole intervals
• geotech: Geotechnical parameters that can sometimes be used as grindability proxies (RQD, r-value, fracture frequency)

Automatically generated tables. Assembled by the program out of the tests entered into the laboratory test tables.

• All: Summarizes all the test results entered for a project, including samples with inadequate information for modelling.
• Queries: Shows the listing of samples that will be run in this model. Only samples that contain all the required inputs will be displayed in this table.

Extra tables, accessible via the [+] button at the top of any page listing test results.

• Laboratory Listing: Listing of laboratories and their colour schemes for plotting results.
• Drillhole Survey: Records the collar position and direction of drilling. Not used in calculations or output.