Difference between revisions of "Talk:How to use the Litho table"
(Created page with " To come, the following function: ===Sorting samples by groups=== A set of sorting options will appear at the top of a testwork table after information has been entered in t...") |
(No difference)
|
Latest revision as of 21:38, 8 December 2013
To come, the following function:
Sorting samples by groups
A set of sorting options will appear at the top of a testwork table after information has been entered in the Litho table. In the example screenshot, the litho and alteration fields have been used to distinguish between different types of lithology (carbonates, andesite, steely hematite and hematite breccia) and ore/waste zones (CCBM - an ore type, and waste).
The drop-down menus above the table can be used to isolate only samples that correspond to a particular category. In this example, selecting the "waste" alteration type would cause the table to show only the 'Prefeas 6' and 'Prefeas 7' samples (the display of all the other samples would be suppressed). Similarly, selecting the "Carbonates" lithology will show only the 'Prefeas 5' sample.
The drop-down groupings are cumulative, so (in the example) setting the lithology to 'Andesite' and the alteration to 'Waste' would show only sample 'Prefeas 6'. Setting the lithology to 'Carbonates' and the alteration to 'Waste' would show no results (there are no samples that are simultaneously Carbonate and waste).
